Options for C, D, E, G, H, K, M, N, Q Series Pickups

1. String spacing - center of one string to the center of the adjacent string over the centerline of the pickup, and not at the physical bridge.  For pole piece pickups, is specified at the time of purchase.
2. Exposed Pole Piece (magnet through the cover) designs are available with Unexposed (flush) pole pieces, though some designs are available only with flush pole pieces.
3. Magnet Material.- Choice of available magnet materials
4. Dual Coil Pickups can be designed as:
1. PHC - Parallel Hum Cancelling - Two independent coils that can be wired in parallel to hum cancel, or each coil can be used independently as a single coil pickup. These pickups have four leads, two per bobbin.  If the pickups are purchases as a neck/bridge set, then the neck most coil of the neck pickup, and the bridge most coil of the bridge pickup can be used as a hum cancelling pair in the same way as two single coil pickups in a J Bass.
2. SHB - Series Hum Bucker - A two coil hum bucking pickup with two leads. This pickup is not designed to be split into single coils.
3. CTSHB - Coil Tapped Series Hum Bucker - A two coil hum bucking pickup with five leads. This pickup is designed to be used as a SHB, and one coil (not both) is designed to be used as single coil pickup. The coil designated as the single coil is neck most coil of the neck pickup, and the bridge most coil of the bridge pickup. A neck/bridge set will include a hum cancelling pair in the same way as two single coil pickups in a J Bass.
4. CTPS - Coil Tapped Parallel or Series - This pickup is both a PHC and an SHB.  These pickups have six leads, three per bobbin.
5. DUMMY - A variant of the PHC -  Two independent coils that can be wired in parallel to hum cancel, where the magnets of one coil are unmagnetized.  If the pickups are purchases as a neck/bridge set, then the neck most coil of the neck pickup, and the bridge most coil of the bridge pickup can be used as a hum cancelling pair in the same way as two single coil pickups in a J Bass. These pickups have four leads, two per bobbin.
6. SoapBarP - A unique Aero configuration variant of the the Series Hum Bucker with only one active row of magnets.  SoapBarP pickups can be manufactured in any number of strings.  The active pole pieces can be in either the front or rear bobbin, give at least 4 standard variations.